AL10 激光皮带对中仪
Laser Belt Alignment SystemQuick and accurate solution for Belt Alignment
- EASY TO USE
- DOUBLE LASER
- UNIVERSAL INSTALLATION
The new Laser Belt Alignment System AL10 uses two laser transmitters for the projection of a
two laser lines. The pulley groves are used as a reference. These generated lines
indicate the alignment of the transmission quickly and correctly.
- Aligment process
The two laser units generate a line on the opposite unit. When the pulleys are correctly aligned, the lines coincide with the references centering on both units. The dual laser alignment provides greater precision and speed than single laser systems. If the belt transmission is misaligned, the line deviates from the center.
- TYPES OF MISALIGNMENT
It is very important that the pulleys are mounted correctly on the shafts and that the shafts are straight before starting the alignment process. The oscillating or deformed sheaves severely influence the quality of the alignment. The types of misalignment are described below:
- Angular misalignment
- Parallel misalignment
| Housing material | Aluminum |
| Dimensions head units | 61 x 77 x 61 mm |
| Weight | 300 g/unit |
| Battery type | 2x LR03 (AAA) 1,5V per unit |
| Operating time | 20 hrs continuous operation |
| Measuring distance | 50 mm – 6000 mm |
| Measuring accuracy | better than 0.5 mm or 0.2 degrees |
| Pulley diameter range | from 75 mm and larger (standard) |
| Pulley belt groove width | 6 mm - 40 mm (standard) |
| Laser class 2 | output power: <1 mW |
| Laser wavelength | 600 - 650 nm |
